ADCO Panels

Features

• 8 Stop Down Collective and 6 Stop Collective Selective
• With AD9007 24 Stop Down Collective and 16 Stop Collective Selective.
• With AD9006 15 Stop Down Collective and 11 Stop Collective Selective.
• Operations Traction : Regular V3F, Down Collective V3F and Collective Selective V3F.
• Operations Hydraulic : Hydraulic Manual Door, Hydraulic Auto Door, Hydraulic Double Auto Door 2 Valve, 3 Valve and 4 Valve Configuration.
• Speed: Up to 2 m/sec.
• All system parameters can be adjusted by using 5 buttons and
• 4 Seven Segment placed on the card.
• Call Register LED and Call Push Button are on single wire.
• On board Seven Segment Display.
• Serial COP Card (AD_CTB) attachment using CAN bus.
• All the Input and Output are Opto-isolated and available in both 12VDCand 24VDC.
• All the Input and Output are carrying LED indication on board.
• An error code are display on display as well as it is memories in the card.
• Each floor can be named by an alphanumeric character (L, P, E, F, H, b, o, 0, 1, 2, 3.....).
• 7-segment and signalization outputs are short-circuiting protected. In a short circuit case the concerned output is shut down until problem is removed.
• It also detect the landing lock short at particular floor.
• Also detect lock short in Auto Door. if Door not open within predefined time
• Power down memory, in case of power fail it will reach at nearest floor instead of going to correction end.
• Only 15 cables are enough for system to work by using serial car connection (AD_CTB) which reduces labor and cable costs.
• Using this Up to 24 Stop Full Serial just 4 Wire Communication can be done easily.
• PCBs are solder in Fully Automatic Pick & Place Robotic Machine. Which will remove all human error.
• 4 Digit Display on board make easier to program parameter and view an error code.
• Using CAN bus you can Program and Monitor the mother board with External Graphical Program Tool